Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Repair Procedures

Inspection

1. Measure the pressure of high pressure line by voltage output between NO.1 and NO.2 terminals

2. Inspect the voltage value whether it is sufficient to be regular value or not.

Voltage =0.00878835 * Pressure + 0.37081095 [PSIA]

3. If the measured voltage value is not specification, replace the A/C pressure transducer.

Replacement

1. Disconnect the negative (-) battery terminal.
2. Recover the refrigerant with a recovery/charging station.
3. Disconnect A/C pressure transducer connector (3P) (A).
4. Remove the A/C pressure transducer(B).

CAUTION:
- Take care that liquid & suction pipe are not bent.

5. Installation is the reverse order of removal.

TORQUE :10 - 12N.m (1.0 - 1.2kgf.m, 7.4 - 8.8lbf.ft)