Power Window Relay: Testing and Inspection

Inspection

1. Disconnect the negative (-) battery terminal.
2. Remove the junction box.
3. Check for continuity between the terminals.
4. There should be continuity between the No.6 in the I/P-F and No.14 terminal in the I/P-D when power and ground are connected to the No.10 terminal in the I/P-E and No.2 terminal in the I/P-J.
5. There should be no continuity between the No.6 terminal in the I/P-F and No.14 terminal in the I/P-D when power is disconnected.