Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2012 >> Santa Fe AWD L4-2.4L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch: Service and Repair





Inspection








1. Disconnect the ignition switch connector (A) and key warning switch connector (B) from under the steering column.
2. Check for continuity between the terminals.
3. If continuity is not specified, replace the switch.






Replacement

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel.

3. Remove the ignition switch (A) after loosening the screw with IG ON and disconnecting the 6P connector.




4. Remove the steering column cover.

5. Remove the door warning switch and key illumination lamp (A) after disconnecting the 6P connector.




6. If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder (A) after pushing lock pin (B) with key ACC.




7. Installation is the reverse of removal procedure.
pro multis · About Operation CHARM