Scantool Diagnostics

Smart Junction Box
B2514 External Tail Lamp RH Circuit Short to Ground - Scantool Diagnostics

Scantool Data Analysis

1. Connect GDS.
2. IG "ON" and engine "OFF".
3. Select "DTC Analysis" mode.
4. After erase DTC, keep the vehicle condition within "the enable conditions" .




5. Is the same DTC occurred again?





Check Right External Tail Lamp
1. IG "OFF" and connect scantool
2. IG "ON" & ENG "OFF"
3. Select "Actuation Test" mode.
4. Execute "Right External Tail Lamp" test.








Fig 1) Normal result After "Right External Tail Lamp relay" Actuation test.
Fig 2) "Right External Tail Lamp output" Curret Data value is "ON" After "Right External Tail Lamp relay"
5. Is Tail lamp working normal ?