Scantool Diagnostics

Smart Junction Box
B2515 External Tail Lamp LH Circuit Short to Ground - Scantool Diagnostics

Scantool Data Analysis

1. Connect GDS.
2. IG "ON" and engine "OFF".
3. Select "DTC Analysis" mode.
4. After erase DTC, keep the vehicle condition within "the enable conditions" .




5. Is the same DTC occurred again?





Check Left External Tail Lamp
1. IG "OFF" and connect scantool
2. IG "ON" & ENG "OFF"
3. Select "Actuation Test" mode.
4. Execute "Left External Tail Lamp" test.








Fig 1) Normal result After "Left External Tail Lamp relay" Actuation test.
Fig 2) "Left External Tail Lamp output" Curret Data value is "ON" After "Left External Tail Lamp relay"
5. Is Tail lamp working normal ?