Scantool Diagnostics

Smart Junction Box
B2516 Front Fog Lamp Circuit Short to Ground - Scantool Diagnostics

Scantool Data Analysis

1. Connect GDS.
2. IG "ON" and engine "OFF".
3. Select "DTC Analysis" mode.
4. After erase DTC, keep the vehicle condition within "the enable conditions" .




5. Is the same DTC occurred again?





Check Fog Lamp
1. IG "OFF" and connect scantool
2. IG "ON" & ENG "OFF"
3. Select "Actuation Test" mode.
4. Execute "Fog Lamp" test.








Fig 1) Normal result After "Front Fog Lamp relay" Actuation test.
Fig 2) "Front Fog Lamp output" Curret Data value is "ON" After "Front Fog Lamp relay"
5. Is Fog Lamp working normal ?