Rear Stabilizer Bar

Replacement

1. Remove the rear wheel & tire.

Tightening torque :
88.3 - 107.9N.m(9.0 - 11.0Kgf.m, 65.1 - 79.6lb-ft)

CAUTION:
Be careful not to damage to the hub bolts when removing the front wheel & tire.

2. Loosen the nut and then remove the rear stabilizer link(B) with the rear lower arm(A).

Tightening torque :
98.1 - 117.7N.m(10.0 - 12.0Kgf.m, 72.3 - 86.8lb-ft)




3. Loosen the mounting bolt and then remove the stabilizer bar(A) with the sub frame.

Tightening torque :
44.1 - 53.9N.m(4.5 - 5.5Kgf.m, 32.5 - 39.8lb-ft)




4. Installation is the reverse of removal.

Inspection

1. Check the rear stabilizer bar for deformation.
2. Check the rear stabilizer link ball joint for damage.