Cabin Temperature Sensor / Switch: Service and Repair

Inspection

1. Ignition "ON"
2. Blow air with changing temperature to the in car sensor air inlet. Measure sensor resistance between 1 and 2 terminals.









Specification






NOTE:
In car sensor is negative type thermistor that resistance will rise with lower temperature, and reduce with higher temperature.

Replacement

1. Disconnect the negative (-) battery terminal.
2. Remove the right center air vent and then disconnect the in car sensor connector (A).




3. Remove the in car sensor (B) from center air vent.




4. Installation is the reverse order of removal.