Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2012 >> Tucson FWD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Fuel Tank >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Tank: Service and Repair





Removal

1. Release the residual pressure in fuel line .
2. Remove the rear seat cushion .
3. Remove the fuel pump service cover (A).




4. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
5. Disconnect the fuel feed tube quick connector (C).




6. Remove the rear - LH wheel & tire.
7. Lift the vehicle and support the fuel tank with a jack.
8. Remove the center muffler assembly .
9. Remove the propeller shaft [4WD].
10. Disconnect the fuel filler hose (A) and the ventilation hose (B).




11. Disconnect the canister close valve connector (A).




12. Disconnect the vapor tube quick-connector (A).




13. Remove the fuel tank from the vehicle after removing the fuel tank band (A).





NOTE:
When removing the fuel tank, the fuel tank must be tilted because of interfering with coupling.

Installation

1. Installation is reverse of removal.

Fuel tank band installation nut:
39.2 - 54.0 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)

pro multis · About Operation CHARM