Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Door Window Glass: Service and Repair





Glass Replacement

1. Remove the following parts.
A. Door trim
B. Door screen
C. Door belt weatherstrip
D. Door delta molding cover
2. After loosening the mounting nuts, then remove the rear channel (A).

Tightening torque :
6.9 - 10.8 N.m (0.7 - 1.1kgf.m 5.1 - 8.0 lb-ft )




3. Remove the glass mounting plug hole.

CAUTION:
- Using the door switch to align the mounting hole with the hole on the door glass.
- If it is impossible, align the hole by hand after removing the motor.
- Be careful not to drop to glass and scratch the glass surface.

4. Carefully adjust the glass (B) until you can see the bolts, then loosen them. Separate the glass from the glass run and carefully pull the glass out through the window slot.

Tightening torque :
6.9 - 10.8 N.m (0.7 - 1.1kgf.m 5.1 - 8.0 lb-ft )




5. Installation is the reverse the removal.

NOTE:

A. Roll the glass up down to see if it move freely without binding
B. Adjust the position of the glass as needed.
C. Make sure the door locks/unlocks and opens/closes properly.
D. Replace ant damaged clips