Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2012 >> Veracruz AWD V6-3.8L >> Repair and Diagnosis >> Body and Frame >> Relays and Modules - Body and Frame >> Power Trunk / Liftgate Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Power Trunk / Liftgate Control Module: Service and Repair





Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the third, seat.

3. Remove the luggage side trim.

4. Use a small screw driver to loosen clip (A). But do not remove power tailgate push rod (B).




5. Remove the power tailgate module mounting bolts (2EA) and connectors (2EA). And then remove the power tailgate module (A).

Torque :0.025 - 0.035 N.m (0.0025 - 0.0035 kg.m)





NOTE:
- Connect the connectors tightly.
- Check the power tailgate for normal operation correctly.

WARNING:
- A lost drive unit mounting bolt in the vehicle may make a noise.
- Don't operate the power tailgate when a push rod is removed.
- A learn cycle must be performed whenever the power is removed.
- Check the normal operating whenever a power tailgate component is removed or replaced. If the chime sound is heard, check the DTC, wiring harness and cable connections.

Installation

1. Reassemble the power tailgate module and connect the connectors.
2. Reassemble the tailgate push rod.
3. Reassemble the luggage side trim.
4. Reassemble the third seat.
pro multis · About Operation CHARM