ICM (Integrated Circuit Module) Relay Box

Inspection

Head Lamp Washer
Check for continuity between the terminals.
1. There should be continuity between the No.6 and No.14 terminals when power and ground are connected to the No.13 and No.14 in the ICM-A.
2. There should be no continuity between the No.6 and No.14 terminals when power is disconnected.

Adjust Pedal Twin Relay
Check for continuity between the terminals.
1. There should be no continuity between the No.11 and No.12 terminals or between the No.5 and No.12 terminals when power and ground are connected to the No.13 and No.14 in the ICM-B.
2. There should be continuity between the No.11 and No.12 terminals or between the No.5 and No.12 terminals when power is disconnected.

Front Wiper Washer
Check for continuity between the terminals.
1. There should be continuity between the No.1 and No.7 terminals when power and ground are connected to the No.1 and No.10 in the ICM-A.
2. There should be no continuity between the No.1 and No.7 terminals when power is disconnected.

Front Wiper
Check for continuity between the terminals.
1. There should be continuity between the No.2 and No.3 terminals when power and ground are connected to the No.1 and No.9 terminals in the ICM-A.
2. There should be no continuity between the No.2 and No.3 terminals when power is disconnected.

Power Tailgate
Check for continuity between the terminals.
1. There should be continuity between the No.5 and No.11 terminals when power and ground are connected to the No.12 and No.4 terminals in the ICM-A.
2. There should be no continuity between the No.5 and No.11 terminals when power is disconnected.