Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2013 >> Azera V6-3.3L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair >> Repair Procedures
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Repair Procedures





Removal and Installation

[LH]
1. Disconnect the battery negative terminal.
2. Remove the engine cover.
3. Disconnect the LH ignition coil connectors (A) and then remove the LH ignition coils.

Tightening torque :
9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)





NOTE:
When disconnecting the ignition coil connector, pull out the locking pin (A) and then pull out the connector while pressing the clip (B).




4. Installation is reverse order of removal.
[RH]
1. Disconnect the battery negative terminal.
2. Remove the surge tank.

3. Disconnect the RH ignition coil connectors (A) and then remove the RH ignition coils.

Tightening torque :
3.9 - 5.9N.m (0.4 - 0.6kgf.m, 2.9 - 4.3lb-ft)





NOTE:
When disconnecting the ignition coil connector, pull out the locking pin (A) and then pull out the connector while pressing the clip (B).




4. Installation is reverse order of removal.

Inspection

1. Measure the primary coil resistance between terminals (+) and (-).





Standard value :0.75Ohms±15%

pro multis · About Operation CHARM