Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2013 >> Azera V6-3.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Linkage >> Shift Cable >> Service and Repair >> Repair Procedures
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Repair Procedures





Removal

1. Remove the center console assembly.

2. Remove the duct (A).




3. Remove the control cable (B).




4. Remove the control cable assembly in the vehicle after removing the nuts (B) and the retainer (A).

Tightening torque:
9.8 - 14.7 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.9 lb-ft)




5. Remove the nut (C).
6. Remove the cable (B) from the bracket (A) at transaxle assembly side.





7. Remove the control cable inside of cab.

Installation

1. Installation is the reverse of removal.

NOTE:
Make sure vehicle does not roll before setting room side shift lever and Automatic Transaxle(AT) side manual control lever to "N" position.

Adjustment

Adjusting method for T/M control cable
1. Make sure vehicle does not roll before setting room side shift lever and Automatic Transaxle(AT) side manual control lever to "N" position.
2. Connect room side shift lever and control cable.
3. Push cable to "F" direction shown to eliminate FREE PLAY.
4. Tighten adjusting nut (A).

Tightening torque:
9.8 - 14.7 N.m (1.0 - 1.5 kgf.m, 7.2 - 10.9 lb-ft)




5. After adjusting, check to be sure that this part operates as designed at each range of Automatic Transaxle(AT) side corresponding to each position of room lever.
pro multis · About Operation CHARM