Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2013 >> Genesis Coupe L4-2.0L Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Level Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Level Sensor: Service and Repair





Removal

1. Preparation
(1) Remove the rear seat cushion.
(2) Remove the service cover of the fuel pump (A).




(3) Disconnect the fuel pump connector (A).




(4) Idle the engine and wait until fuel in feed line is exhausted.
(5) After engine stops, turn the ignition switch OFF.
2. Remove the service cover of the sub fuel sender (A).




3. Disconnect the sub fuel sender connector (A).
4. Disconnect the suction tube quick-connector (B).
5. Remove the sub fuel sender from the fuel tank after removing the installation bolts (C).










Installation

1. Installation is reverse of removal.

Sub fuel sender installation bolt :
2.0 - 2.9 N.m (0.2 - 0.3 kgf.m, 1.4 - 2.2 lb-ft)

CAUTION:
When installing the sub fuel sender, be careful not to get the seal-ring entangled.

pro multis · About Operation CHARM