Repair Procedures

Removal

4WD only
1. Remove the rear wheel and tire.

Tightening torque:
88.3 - 107.9 N.m (9.0 - 11.0 kgf.m, 65.1 - 79.6 lb-ft)

2. Remove the rear wheel speed sensor mounting bolt (A).

Tightening torque:
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 7.6 lb-ft)




3. Remove the rear wheel guard.
4. Disconnect the rear wheel speed sensor connector (A).




5. Installation is the reverse of removal.

CAUTION:
Install the rear sensor after lubricating the O-ring of sensor with the assembly fluid(RAREMAAF-1).
When inserting the sensor, take care the O-ring not to be damaged.

2WD only
1. Remove the connector (A) after removing the front wheel speed sensor clip.




2. Remove the rear wheel speed sensor.

3. Installation is the reverse of removal.