Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2013 >> Santa Fe AWD L4-2.4L >> Repair and Diagnosis >> Lighting and Horns >> Turn Signals >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Turn Signals: Service and Repair





Removal

1. Disconnect the negative (-) battery terminal.
2. Loose the screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination lamp (B).








3. If it is necessary to replace the bulb, remove the rear combination cover (A).




4. Remove the bulb (A) after disconnecting the connector.




5. Remove the tailgate trim.

6. Remove the inside rear combination lamp assembly (A) after loosening the nuts (4EA) and disconnecting the connector.




7. Remove the bulb (B) after separating the inside rear combination lamp assembly (A).




8. If it is necessary to replace the bulb, remove the bulb after removing the tailgate cover.

Installation

1. Install the tailgate combination lamp assembly after assembling the bulb.
2. Install the lamp cover to the tailgate after connecting the lamp connector.
3. Install the rear combination lamp assembly after assembling the bulbs and connecting the lamp connector.
pro multis · About Operation CHARM