Navigation System: Service and Repair

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the glove box housing.

3. Disconnect the cables and connector (A) from the MTS unit.

[Audio type]





[AVN type]




4. Remove the MTS unit after loosening the nuts(2EA) and a bolt.






Installation

1. Connect the connector and cables.
2. Install the MTS unit.
3. Install the glove box housing.
4. Connect the negative (-) battery terminal.

Inspection

1. After replacing the TMU, connect to "call center" by pushing the Blue Link button.
2. If Blue Link service connected successfully, and then technician can hear the "Welcome to Hyundai Bluelink" sound.

NOTE:
After replacing the TMU, the TMU automatically read the Vehicle Identity Number (VIN) and send it to Blue Link service center.
In this reason, technician have to test that Blue Link connect normally.