Repair procedures

Replacement

1. Remove the cap (A) and remove the nuts, then remove the wiper arm (B).

Tightening torque :
22.6 - 26.5 N.m(2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)




2. Detach the clips, then remove the fender side cover (A).




3. Remove the glue on end of both sides (A) of the hood weatherstrip.




4. Disconnect the nozzle hose (B).
5. Detach the clips, then remove the cowl top cover (A).




6. Install in the reverse order of removal.

CAUTION:
- Replace any damaged clips.