Repair procedures

Replacement

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Using a screwdriver or remover, remove the rear console cover (A).




2. Disconnect the power outlet connector (A).




3. Install in the reverse order of removal.

CAUTION:
- Make sure the connector is connected properly.
- Replace any damaged clips.