Repair procedures

Replacement

[Second row seat assembly]
(LH)

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Remove the second row seat assembly [LH].

2. Remove the protector (A) located in the bottom side of the rear seat cushion.




3. After loosening the mounting screw, then remove the rear seat slide knob (A).




4. After loosening the mounting screw, then remove the rear seat slide outer cover (A).




5. Remove the protector (A) located in the side part of the rear seat cushion.




6. Remove the rear seat cushion cover (A) from the rear seat cushion frame.




7. After removing the velcro tape (A) on the rear of seat cushion and remove the rear seat cushion cover (B).




8. Install in the reverse order of removal.

CAUTION:
- Replace any damaged clips.

(RH)

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Remove the second row seat assembly [RH].

2. Remove the protector (A) located in the bottom side of the rear seat cushion.




3. After loosening the mounting screw, then remove the rear seat slide knob (A).




4. After loosening the mounting screw, then remove the rear seat slide outer cover (A).




5. Remove the protector (A) located in the side part of the rear seat cushion.




6. Remove the rear seat cushion cover (A) from the rear seat cushion frame.




7. After removing the velcro tape (A) on the rear of seat cushion and remove the rear seat cushion cover (B).




8. Install in the reverse order of removal.

CAUTION:
- Replace any damaged clips.

[Third row seat assembly]

CAUTION:
- Put on gloves to protect your hands.

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
- Take care not to bend or scratch the trim and panels.

1. Remove the third row seat assembly.

2. Loosen the rear seat frame mounting bolts (A).

Tightening torque :
44.1 - 53.9 N.m (4.5 - 5.5 kgf.m, 32.5 - 39.8 lb-ft)




3. Push the rear seat cushion frame (A) to the front of the vehicle as far as possible.




4. After loosening the mounting screw, then remove the rear seat outer link cover (A).




5. After loosening the mounting screw, then remove the rear seat inner link cover (A).




6. Remove the protector (A) located in the side part of the rear seat cushion.




7. Remove the rear seat cushion cover (A) from the rear seat cushion frame.




8. After removing the velcro tape (A) on the rear of seat cushion and remove the rear seat cushion cover (B).




9. Install in the reverse order of removal.

CAUTION:
- Replace any damaged clips.