Brake Lamp: Service and Repair

Removal

1. Disconnect the negative (-) battery terminal.
2. Loose the screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination lamp (B).








3. If it is necessary to replace the bulb, remove the rear combination cover (A).




4. Remove the bulb (A) after disconnecting the connector.




5. Remove the tailgate trim.

6. Remove the inside rear combination lamp assembly (A) after loosening the nuts (4EA) and disconnecting the connector.




7. Remove the bulb (B) after separating the inside rear combination lamp assembly (A).




8. If it is necessary to replace the bulb, remove the bulb after removing the tailgate cover.

Installation

1. Install the tailgate combination lamp assembly after assembling the bulb.
2. Install the lamp cover to the tailgate after connecting the lamp connector.
3. Install the rear combination lamp assembly after assembling the bulbs and connecting the lamp connector.