Fuel Line

Removal

1. Turn the ignition switch OFF, and then remove battery (-) cable.
2. Release the residual pressure in fuel line.

3. Disconnect the low pressure fuel quick-connector (A).




4. Disconnect the vapor hose (A) which is connected from the PCSV.




5. Lift the vehicle.
6. Remove the fuel tank.

7. Disconnect the vapor tube quick-connector (A).




8. Open the vapor tube and low fuel line fixing clip to using driver.
9. Release the under cover (A) after remove the mounting bolts.




10. Disconnect the fuel & brake line protect (A) from the fixing clip.




11. Disconnect the fuel line fixing bracket (A) to engine room low.




12. Remove the fuel line.

Installation

1. Install in the reverse order of removal.