Seat Temperature Switch: Service and Repair

Removal

Driver/ Passenger
1. Disconnect the negative (-) battery terminal.
2. Remove the floor console assembly.

3. Remove the heater switch after loosening the screws.

[A/T]




4. Remove the front tray cover (A).

[M/T]




5. Remove the heater switch after loosening the screws.





Second Seat
1. Disconnect the negative (-) battery terminal.
2. Remove the rear door trim.

3. Remove the power window switch after loosen the screws (3EA).

Installation

Driver/ Passenger
1. Install the heater switch.
2. Install the floor console upper cover.
3. Connect the negative (-) battery terminal.

Second Seat
1. Install the power window switch.
2. Install the rear door trim.
3. Connect the negative (-) battery terminal.

Inspection

Driver/ Passenger Seat
1. Disconnect the negative (-) battery terminal.
2. Remove the floor console assembly.

3. Operate driver seat heater switch and check that continuity exists between the terminals.
If there is no continuity, replace the seat heater switch.









Second Seat
1. Disconnect the negative (-) battery terminal.
2. Remove the rear door trim.

3. Operate driver seat heater switch and check that continuity exists between the terminals.
If there is no continuity, replace the seat heater switch.