Front Lower Arm

Removal

1. Remove the front wheel and tire (A) from front hub.

Tightening torque:
88.2 - 107.8 N.m (9.0 - 11.0 kgf.m, 65.0 - 79.5 lb-ft)

CAUTION:
Be careful not to damage to the hub bolts when removing the front wheel and tire (A).





2. Loosen the bolt & nut and then remove the lower arm (A).

Tightening torque:
98.1 - 117.7N.m (10.0 - 12.0kgf.m, 72.3 - 86.8lb-ft)




3. Remove the front lower arm (C) and than loosen the bolts (A,B) & nuts.

Tightening torque:
(A) 137.3 - 156.9N.m (14.0 - 16.0kgf.m, 101.3 - 115.7lb-ft)
(B) 117.7 - 137.3N.m (12.0 - 14.0kgf.m, 86.8 - 101.3lb-ft)








4. Installation is the reverse of removal.
5. Check the front alignment.


Inspection

1. Check the bushing for wear and deterioration.
2. Check the lower arm for bending or breakage.
3. Check the lower arm for deformation.
4. Check the all bolts and nuts.