Rear Upper Arm

Removal

1. Remove the rear wheel and tire (A) from rear hub.

Tightening torque :
88.2 - 107.8 N.m (9.0 - 11.0 kgf.m, 65.0 - 79.5 lb-ft)

CAUTION:
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).




2. Support the rear lower arm (A) with a jack as shown in the illustration.

NOTE:
Certainly install Jack as being danger because of the tension.




3. Loosen the bolt & nut and then remove the rear upper arm (A).

Tightening torque :
2WD
137.3 - 156.9N.m (14.0 - 16.0kgf.m, 101.3 - 115.7lb-ft)
4WD
98.1 - 117.7N.m (10.0 - 12.0kgf.m, 72.3 - 86.8lb-ft)

[2WD]





[4WD]




4. Installation is the reverse of removal.
5. Check the rear alignment.


Inspection

1. Check the bushing for wear and deterioration.
2. Check the rear upper arm or damage and deformation.
3. Check for all bolts and nut.