Wiper Switch: Service and Repair

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the steering column upper and lower shrouds (A) after loosening 3 screws.




3. Disconnect the connector (A).




4. If necessary of removing the wiper & washer switch (A), release the lock of wiper switch using tool without removing the steering wheel and the clock spring.




5. Remove the steering wheel.

6. Remove the clock spring.

7. Remove the multifunction switch (A) after loosening the mounting screws (2EA).






Installation

1. Install the multifunction switch after connecting the connector.
2. Install the clock spring and steering.
3. Install the upper and lower shroud.
4. Install the steering wheel.

Inspection

Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch.






Wiper Switch





Washer Switch