Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2013 >> Tucson AWD L4-2.4L >> Repair and Diagnosis >> Lighting and Horns >> Brake Lamp >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Lamp: Service and Repair





Removal

1. Disconnect the negative (-) battery terminal.
2. Loose the screws (2EA) holding the rear combination lamp then disconnect the connector (A) then remove the outside rear combination lamp (B).








3. Turn the socket counterclockwise to remove the tail/stop lamp bulb (A) and turn signal lamp bulb (B).




4. Loosen the nuts (A) after removing the tailgate lamp cover.




5. Remove the tailgate lamp (B) after disconnecting the connector (A).




6. Turn the socket counterclockwise to remove the back up lamp bulb (A) and tail lamp bulb (B).




7. If the bulbs should be only replaced without removing lamp assembly, replace the back up lamp bulb (A) and tail lamp bulb (B) after removing the tailgate lamp cover inside trunk.






Installation

1. Install the tailgate combination lamp assembly after assembling the bulb.
2. Install the lamp cover to the tailgate after connecting the lamp connector.
3. Install the rear combination lamp assembly after assembling the bulbs and connecting the lamp connector.
pro multis · About Operation CHARM