Front Door Panel: Service and Repair

Replacement

Front Door Trim Replacement

CAUTION:
- When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the quadrant inner cover (A).
2. Disconnect the tweeter speaker connector (B).




3. After loosening the mounting screws, then remove the door inside handle housing (B).
4. After loosening the mounting screws, then remove the door trim (A).




5. Push the lock pin (A), disconnect the connectors (B).




6. Installation is the reverse of removal.

NOTE:
- Make sure connectors are connected properly and each rod is connected securely.
- Make sure the door locks/unlocks and opens/closes properly.
- Replace and damaged clips.