Repair Procedures

Fuse Inspection

1. Be sure there is no play in the fuse holders, and that the fuses are held securely.
2. Are the fuse capacities for each circuit correct?
3. Are there any blown fuses?
If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse.

Removal

Passenger Compartment Junction Box (IPM)
1. Disconnect the negative(-) battery terminal.
2. Remove the crash pad lower panel.

3. Disconnect the connectors from the fuse side of the passenger compartment junction box (A).




4. Remove the passenger compartment junction box after loosening the mounting nuts (2EA) and bolt.
5. Disconnect the connectors and the cables from the back side of the passenger compartment junction box.

Installation

1. Install the connectors and the cables from the back side of the passenger compartment junction box.
2. Install the crash pad lower panel.
3. Check that all system operates normally.