Exhaust Manifold

Exhaust Manifold

Install the turbo manifold module and gasket.

Tightening torque 35.3 - 41.1N.m (3.6 - 4.2 kgf.m, 26.0 - 30.3 lb-ft)






NOTE:
- When installing, you should assemble it toward the coating side(black).
- When installing, temporarily tighten the nut in picture order and completely tighten the bolt as specified torque in order.






CAUTION:
- When installing, replace with a new gasket.
- If the oil feed pipe and hose is damaged, the turbocharger could be damaged because turbocharger oil supply is not good. Be careful to not crush.