Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2013 >> Veloster L4-1.6L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Console >> Service and Repair >> Repair Procedures
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Repair Procedures





Replacement

Floor Console Replacement
[M/T]

CAUTION:
- A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the parking brake cover (A).




2. Using a screwdriver or remover, remove the gear boots (A).




3. Using a screwdriver or remover, remove the console upper cover (A).




4. Remove the console tray mat (A).




5. After loosening the mounting screws and bolts, then remove the floor console assembly (A).




6. After loosening the mounting clips and screws, then remove the console side cover (A).




7. Installation is the reverse of removal.

NOTE:
- Make sure the connector are connected in properly.
- Replace any damage clips.

[A/T]

CAUTION:
- A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the parking brake cover (A).




2. Using a screwdriver or remover, remove the console upper cover (A).




3. Disconnect the connector (A).




4. Remove the console tray mat (A).




5. After loosening the mounting screws and bolts, then remove the floor console assembly (A).




6. After loosening the mounting clips and screws, then remove the console side cover (A).




7. Installation is the reverse of removal.

NOTE:
- Make sure the connectors are connected in properly.
- Replace any damaged clips.

Rear Console Cover Replacement

CAUTION:
- A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the rear console cover (A).




2. Installation is the reverse of removal.

NOTE:
- Replace any damage clips.

Armrest assembly Replacement

CAUTION:
- A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the rear console cover (A).




2. After loosening the mounting screws, then remove the armrest assembly (A).




3. Installation is the reverse of removal.

NOTE:
- Replace any damage clips.

pro multis · About Operation CHARM