ABS Warning Lamp, Slip Indicator Lamp and VDC Off Indicator Lamp Inspection

ABS WARNING LAMP, SLIP INDICATOR LAMP AND VDC OFF INDICATOR LAMP INSPECTION
1. Make sure ABS warning lamp, SLIP indicator lamp and VDC OFF indicator lamp (when VDC OFF switch is off), turn on for approximately 2 seconds when the ignition switch is turned ON. If they do not, check the VDC OFF indicator lamp and the VDC OFF switch. Refer to BRC-59, "VDC OFF SWITCH". Component Inspection
Check CAN communications. If there are no errors with the VDC OFF switch or CAN communication system, replace combination meter. Refer to DI-5, "COMBINATION METERS".
2. Make sure the lamps turn off approximately 2 seconds after the ignition switch is turned ON. If the lamp does not turn off, conduct self-diagnosis of ABS actuator and electric unit (control unit). If no malfunctions are detected in self-diagnosis, replace combination meter. Refer to DI-5, "COMBINATION METERS".
3. With the engine running, make sure the VDC OFF indicator lamp turns on and off when the VDC OFF switch is turned on and off. If the indicator lamp status does not correspond to switch operation, check the VDC OFF switch. Refer to BRC-59, "VDC OFF SWITCH". Component Inspection
4. After conducting the self-diagnosis, be sure to erase the error memory. Refer to BRC-27, "CONSULT-II Function (ABS)". Consult-II Function (ABS)