ABS Does Not Work

ABS Does Not Work

CAUTION: The ABS does not operate when the vehicle speed is 10 km/h (6 MPH) or less.

INSPECTION PROCEDURE
1. CHECK WARNING LAMP ACTIVATION
Turn ignition switch ON and check for warning lamp activation.
^ Warning lamp should activate for approximately 2 seconds after turning the ignition switch ON.
OK or NG
OK >> Carry out self-diagnosis. Refer to BRC-27, "SELF-DIAGNOSIS". Self-Diagnosis
NG >> Go to BRC-23, "ABS WARNING LAMP, SLIP INDICATOR LAMP AND VDC OFF INDICATOR LAMP INSPECTION". ABS Warning Lamp, Slip Indicator Lamp and VDC Off Indicator Lamp Inspection