Special Repair Requirement

INSPECTION AND ADJUSTMENT


SYSTEM INITIALIZATION : Special Repair Requirement


INITIALIZATION PROCEDURE
1. CHOOSE METHOD
There are two initialization methods.
Which method do you use?
With door switch-GO TO 2.
With vehicle speed-GO TO 4.
2. STEP A-1
Turn ignition switch from ACC to OFF position.
- GO TO 3.
3. STEP A-2
Driver door switch is ON (open) to OFF (close) to ON (open).
- END
4. STEP B-1
Drive the vehicle at more than 25 km/h (16 MPH).
- END