Navigation (Twin Monitor)

STEERING SWITCH SIGNAL B CIRCUIT


Description

Transmits the steering switch signal to AV control unit.




STEERING SWITCH SIGNAL B CIRCUIT


Diagnosis Procedure

1.CHECK STEERING SWITCH SIGNAL B CIRCUIT
1. Disconnect AV control unit connector and spiral cable connector.
2. Check continuity between AV control unit harness connector and spiral cable harness connector.





3. Check continuity between AV control unit harness connector and ground.





Is inspection result normal?
YES - GO TO 2.
NO - Repair harness or connector.
2.CHECK SPIRAL CABLE
Check spiral cable.
Is inspection result normal?
YES - GO TO 3.
NO - Replace spiral cable.
3.CHECK AV CONTROL UNIT VOLTAGE
1. Connect AV control unit connector and spiral cable connector.
2. Turn ignition switch ON.
3. Check voltage between AV control unit harness connector.





Is inspection result normal?
YES - GO TO 4.
NO - Replace AV control unit.
4.CHECK STEERING SWITCH
1. Turn ignition switch OFF.
2. Check steering switch. Refer to Navigation (Twin Monitor).
Is inspection result normal?
YES - INSPECTION END
NO - Replace steering switch.