Diagnosis Procedure

BACK DOOR REQUEST SWITCH


Description

Transmits lock/unlock operation to BCM.




BACK DOOR REQUEST SWITCH


Diagnosis Procedure

1.CHECK BCM OUTPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect back door opener request switch.
3. Check signal between back door opener request switch harness connector and ground.





Is the inspection result normal?
YES - GO TO 3.
NO - GO TO 2.
2.CHECK BACK DOOR OPENER REQUEST SWITCH CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector and back door opener request switch harness connector.





3. Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES - Replace BCM. Refer to Removal and Installation.
NO - Repair or replace harness.
3.CHECK BACK DOOR OPENER REQUEST SWITCH GROUND CIRCUIT
Check continuity between back door opener request switch harness connector and ground.





Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace harness.
4.CHECK BACK DOOR OPENER REQUEST SWITCH
Refer to Component Inspection.
Is the inspection result normal?
YES - GO TO 5.
NO - Replace back door opener request switch. Refer to Removal and Installation.
5.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- INSPECTION END