Removal and Installation

REAR DOOR LOCK


DOOR LOCK : Removal and Installation


REMOVAL
1. Remove outside handle escutcheon, outside handle, rear gasket and front gasket. Refer to Removal and Installation.
2. Remove rear door finisher. Refer to Removal and Installation.
3. Remove sealing screen, rear door glass and rear door sash. Refer to Removal and Installation.
4. Remove outside handle bracket. Refer to Exploded View.
5. Remove door lock assembly TORX bolts.
6. Disconnect door lock actuator connector, and then remove door lock assembly.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Check door lock cables are properly engaged with inside handle and outside handle.
- After installation, check door open/close, lock/unlock operation.