Disassembly and Assembly

FRONT COMBINATION LAMP


Disassembly and Assembly


DISASSEMBLY
1. Rotate the resin cap counterclockwise and unlock it.
2. Rotate the xenon bulb socket counterclockwise and unlock it.
3. Remove the retaining spring lock. Remove the xenon bulb.
4. Remove the bumper bracket.
5. Remove the HID control unit installation screw.
6. Remove the screw. Disconnect the connector from HID control unit.
7. Pull out the xenon bulb socket from the headlamp housing assembly.
8. Rotate the parking lamp bulb socket counterclockwise and unlock it.
9. Remove the bulb from the parking lamp bulb socket.
10. Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
11. Remove the bulb from the front turn signal lamp bulb socket.
12. Rotate the front side marker lamp bulb socket counterclockwise and unlock it.
13. Remove the bulb from the front side marker lamp bulb socket.

ASSEMBLY
Assemble in the reverse order of disassembly.

CAUTION:
- Install HID control unit securely.
- After installing the bulb, install the resin cap and the bulb socket securely for watertightness.