RAS Warning Lamp Does Not Turn On
RAS WARNING LAMP DOES NOT TURN ON
Description
RAS warning lamp does not turns ON when turning ignition switch ON from OFF.
RAS WARNING LAMP DOES NOT TURN ON
Diagnosis Procedure
1.CHECK RAS SYSTEM POWER SUPPLY AND GROUND CIRCUIT
With CONSULT-III
Perform the trouble diagnosis of the power supply and ground circuit. Refer to With Rear Active Steer.
Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace the specific malfunctioning part.
2.CHECK RAS WARNING LAMP
With CONSULT-III
Perform the trouble diagnosis of RAS warning lamp. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES - Check that there is no malfunction in each harness connector pin terminal or disconnection.
NO - Repair or replace the specific malfunctioning part.