Scan Tool Testing and Procedures

DIAGNOSIS SYSTEM (E-SUS CONTROL UNIT)


CONSULT-III Function


FUNCTION
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.






ECU IDENTIFICATION
E-SUS control unit part number can be read.

SELF-DIAGNOSTIC RESULT

Display Item List
Refer to Testing and Inspection.

DATA MONITOR

Display Item List






ACTIVE TEST

CAUTION:
- Always perform while the vehicle is stopped.
- Always check shock absorber actuator if DTC is detected using the shock absorber actuator active test.
- Shock absorber actuator
The control signal from CONSULT-III forces activation of the shock absorber actuator. The check can be performed by confirming the operation noise.





- Mode lamp
The control signal from CONSULT-III forces activation of the mode lamp (ON/OFF) for check.