AWD Warning Lamp Blinks Slowly

AWD WARNING LAMP BLINKS SLOWLY


Description

AWD warning lamp blinks at approximately 2 seconds intervals while driving.




AWD WARNING LAMP BLINKS SLOWLY


Diagnosis Procedure

1.CHECK TIRE
Check the following.
- Tire pressure
- Wear condition
- Front and rear tire size (There is no difference between front and rear tires.)
Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace error-detected parts. And then, drive the vehicle at speed of 20 km/h (12 MPH) or more for 5 seconds or more. Improper size information is initialized accordingly.
CHECK INPUT SIGNAL OF TIRE DIAMETER
With CONSULT-III
1. Start the engine.
2. Drive at 20 km/h (12 MPH) or more for approximately 4 minutes.
3. Check "DIS-TIRE MONI" of AWD control unit CONSULT-III "DATA MONITOR".
Does the item on "DATA MONITOR" indicate "0 - 4 mm"?
YES - INSPECTION END
NO - GO TO 3.
3.TERMINAL INSPECTION
Check AWD control unit harness connector for disconnection.
Is the inspection result normal?
YES - Replace AWD control unit. Refer to Exploded View.
NO - Repair or replace the error-detected parts.