Navigation (Single Monitor)

SIDE CAMERA RH


Removal and Installation


REMOVAL
1. Remove glass mirror (passenger side). Refer to Without ADP.





2. Remove screws (A) and actuator connector, and then actuator
(1).
3. Remove door mirror cover. Refer to Without ADP.





4. Remove screws (A) and connector (1), and then remove Side camera finisher assembly (RH).
5. Remove side camera (RH) screws.
6. Remove side camera (RH).

INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. Refer to Navigation (Single Monitor) Navigation (Single Monitor), "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Special Repair Requirement".

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.