Removal and Installation

COOLING FAN


Removal and Installation


REMOVAL
1. Drain engine coolant. Refer to Draining.
2. Remove reservoir tank. Refer to Exploded View.
3. Remove air cleaner case (bank 1 and bank 2). Refer to Exploded View.
4. Remove mounting bolt from high pressure flexible hose bracket. Refer to Exploded View.
5. Remove radiator hose (upper). Refer to Exploded View.
6. Disconnect harness connector from cooling fan control module, and move harness to aside.
7. Remove cooling fan assembly.

CAUTION:
Be careful not to damage or scratch on radiator core.

INSTALLATION
Note the following, and install in the reverse order of removal.

CAUTION:
Only use genuine parts for cooling fan mounting bolt and observe the specified torque (to prevent radiator from being damaged).