Tightening Specifications
| Camshaft Bearing Cap Bolts | Step 1 | 2 |
| Step 2 | 6 | |
| Step 3 Bolts A, B, D | 9.8 - 11.8 | |
| Step 3 Bolt C | 18 - 25 | |
| Cylinder Head Bolts | Step 1 | 39 |
| Step 2 | 78 | |
| Step 3 | 0 Loosen All Bolts Completely | |
| Step 4 | 34 - 44 | |
| Step 5 | 90 - 95 Degrees Do Not Turn Any Bolt 180 -190 Degrees All At Once | |
| Step 6 | 90 - 95 Degrees Do Not Turn Any Bolt 180 - 190 Degrees All At Once | |
| Camshaft Sprocket Bolts | 137 -157 | |
| Head Surface Distortion | Standard | Less Than 0.03 |
| Limit | 0.1 | |
| Nominal Cylinder Head Height "H" | 136.9 - 137.1 | |
| 136.9 - 137.1 | ||
| Resurfacing Limit | 0.2 |