CONSULT-II Checking System

Part 1 Of 2:

Part 2 Of 2:

Function and System Application

Nickel Metal Hydride Battery Replacement
CONSULT-II contains a nickel metal hydride battery. When replacing the battery obey the following:

WARNING: Replace the nickel metal hydride battery with Genuine CONSULT-II battery only. Use of another battery may present a risk of fire or explosion. The battery may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble of dispose of in fire.
Keep the battery out of reach of children and discard used battery conforming to the local regulations.




Checking Equipment
When ordering the equipment, contact your NISSAN/INFINITI distributor.

NOTE:
- The CONSULT-II must be used in conjunction with a program card. CONSULT-II does not require loading (Initialization) procedure.
- Be sure the CONSULT-II is turned off before installing or removing a program card.




CONSULT-II Data Link Connector (DLC) Circuit




INSPECTION PROCEDURE
If the CONSULT-II cannot diagnose the system properly, check the following items.

NOTE: The DDL1 and DDL2 circuits from DLC pins 12, 13, 14, and 15 may be connected to more than one system.

A short in a DDL circuit connected to a control unit in one system may affect CONSULT-II access to other systems.