Without Scan Tool

FUNCTION
- When a problem occurs in the ABS, the SLIP indicator on the instrument panel comes on. To start the self-diagnostic results mode, ground the self-diagnostic (check) terminal located on Data Link Connector". The location of the malfunction is indicated by the SLIP indicator flashing.








SELF-DIAGNOSIS PROCEDURE

HOW TO READ SELF-DIAGNOSTIC RESULTS (Malfunction codes)





- Determine the code No. by counting the number of times the SLIP indicator flashes on and off.
- When several malfunctions occur at one time, up to three code numbers can be stored; the latest malfunction will be indicated first. The indication begins with the start code 12. After that a maximum of three code numbers appear in the order of the latest one first.
- The indication then returns to the start code 12 to repeat (the indication will stay on for five minutes at the most).