Removal and Installation

Removal

WARNING: Clean brakes with a vacuum dust collector to minimize the hazard of airborne particles or other materials.





Remove torque member fixing bolts and connecting bolt.
It is not necessary to remove connecting bolt except for disassembly or replacement of caliper assembly. In this case, suspend caliper assembly with wire so as not to stretch brake hose.

Installation

CAUTION:
- Refill with new brake fluid "DOT 3".
- Never reuse drained brake fluid.

1. Install caliper assembly.
Do not forget to install shims and washers.





2. Install brake hose to caliper securely.
3. Install all parts and secure all bolts.
4. Bleed air.