How to Read DTC and 1st Trip DTC
HOW TO READ DTC AND 1ST TRIP DTCThe number of blinks of the malfunction indicator lamp in the Diagnostic Test Mode II (Self-Diagnostic Results) Examples: 1101, 1102, 1103, 1104, etc.
TCM SELF-DIAGNOSTIC PROCEDURE (No Tools)
Preparation
1. Turn ignition switch to "OFF" position.
2. Connect the handy type vacuum pump to the throttle opener and apply vacuum -25.3 kPa (-190 mmHg, -7.48 inHg).
3. Disconnect the throttle position switch harness connector.
4. Turn ignition switch to "ON" position.
5. Check continuity of the closed throttle position switch.
Continuity should exist. (If continuity does not exist, check throttle opener and closed throttle position switch. Then increase vacuum until closed throttle position switch shows continuity.)
6. Go to "DIAGNOSIS START".
DIAGNOSIS START
1 of 2
2 of 2
JUDGEMENT OF SELF-DIAGNOSIS CODE
1 of 2
2 of 2