CONSULT-II Inspection Procedure

1. Turn ignition switch OFF
2. Connect "CONSULT-II" to data link connector.




3. Turn ignition switch ON.
4. Turn ASCD main switch ON.
5. Touch START (on CONSULT-II display).
6. Touch ASCD.
7. Touch SELF-DIAG RESULTS.




- Self-diagnostic results are shown on display.
Refer to "CONSULT-II Self-diagnostic Results" table.




8. Touch DATA MONITOR.
The items are available as data monitor items.




- Touch START.
- Data monitor results are shown on display. Refer to "CONSULT-II Data Monitor" table.

For further information, read the CONSULT-II.